Showing posts with label heli. Show all posts
Showing posts with label heli. Show all posts
Tuesday, May 19, 2009

Learning heli loops on the Blade 400 3D

›

Blade 400 RC Heli Accident

›
I was trying to solve a problem with my gyro and tail servo. So, I decided to overhaul the heli. Unfortunately, I may not have secured the f...
2 comments:
Sunday, April 5, 2009

Trick to learning nose in hover on mode 2 transmitter.

›
Here's a trick I came up with when I was learning to hover nose-in: "Just follow the heli with your stick." Confused? Here...
2 comments:
Friday, April 3, 2009

Blade 400 DX6i Binding Instructions

›
Start with both transmitter and receiver turned off. 1) Attach bind plug to Rx (heli) 2) Turn on the Rx (heli) --> Light blinking means b...
1 comment:
Monday, March 2, 2009

Blade 400 ESC cut-off too early

›
I hit this problem earlier using the factory setup of the blade 400. It took me a few batteries to figure out what was happening. Here are t...
1 comment:

E-Flite Blade 400 - From A-to-B, Turn! Faster! ...Ahhhh! Crash!

›
I've started getting bored with just hovering. So, this week I decided to attempt a little forward flight. Slowly at first but gradually...

E-Flite Blade 400 - Learning Forward Flight & Left Hand Pivots

›
Somehow, I find it more difficult to pivot counter-clockwise than clockwise. I'm really sure why. I think it has to do with the main rot...
Wednesday, February 25, 2009

E-Flite Blade 400 Beginner Setup for Hovering and Slow Forward Flight. (16 minutes of flight time!)

›
The following setup is a result of reading forums and a lot of my own experimentation. I recommend it for anyone who is learning to hover or...
7 comments:
Tuesday, February 24, 2009

E-Sky Lama V3 Flexible Tail

›
The original tail is probably the most fragile part of the Lama V3. It broke on my very first flight (ahem, first crash, I should say). For ...

E-Flite Blade 400 Piro Floor

›

E-Flite Blade 400 Learning Nose-In Hover

›
Monday, February 9, 2009

E-Flite Blade 400 First Outdoor Crash

›